??？

　　If you have an infrared camera, you will need a housing for it. There are many factors you need to take into account when machining an infrared camera housing. In this article, we will introduce the factors that need to be considered in detail to help you make more accurate machining of the infrared camera housing.

　　1.熱像儀外殼加工受環境溫度影響

　　1. The processing of the infrared camera housing is affected by the ambient temperature

　　環境溫度對熱像儀外殼加工來說是非常重要的，如果環境溫度不穩定，它就可能影響你的熱像儀外殼的加工精度。防止你的熱像儀外殼受到影響，你需要確保庫房內溫度穩定。環境溫度可能對外殼的操作及其外觀產生影響。

　　The environment temperature is very important for the processing of the infrared camera housing. If the environment temperature is unstable, it may affect the machining accuracy of your infrared camera housing. To prevent your infrared camera housing from being affected, you need to ensure that the temperature in the warehouse is stable. Environmental temperature may affect the operation and appearance of the housing.

　　這樣做會導致熱像儀信息的背景變亮，這在光學成像中被稱為“熱透視”。而且，當外殼邊緣不穩定時，這種“熱透視”也會被外露。

　　This will make the background of the infrared camera information bright, which is called "thermal perspective" in optical imaging. Moreover, when the edge of the housing is unstable, this "thermal perspective" will also be exposed.

　　2.表面粗糙度

　　2. Surface roughness

　　表面粗糙度是影響熱像儀外殼加工精度的最重要因素之一，如果表面粗糙度太高，則會影響你的外殼的光學性能。此外，表面粗糙度還會影響你的熱像儀外殼的密封性。

　　Surface roughness is one of the most important factors affecting the machining accuracy of the infrared camera housing. If the surface roughness is too high, it will affect the optical performance of your housing. In addition, surface roughness will also affect the sealing of your infrared camera housing.

　　3.平衡

　　3. balance

　　要使熱像儀外殼更加平衡，需要采用合適的加工方法。要加工一個平衡的外殼，首先需要考慮外殼的周邊。你需要通過測量遠紅外傳感器的環境來得到準確的尺寸。

　　In order to make the infrared camera housing more balanced, appropriate processing methods need to be used. To process a balanced housing, you need to consider the periphery of the housing first. You need to get accurate dimensions by measuring the environment of the far-infrared sensor.

　　4.密封

　　4. sealing

　　最后，密封是非常重要的，因為密封可以防止熱像儀外殼中的氣體、水蒸氣及其他物質進入。如果你的外殼沒有良好的密封性，那么氣體可能會損壞你的熱像儀，水蒸氣也可能會腐蝕你的熱像儀，因此密封是非常必要的。而且，如果你的熱像儀外殼沒有良好的密封性，那么它可能會影響你的熱像儀的性能。

　　Finally, sealing is very important because it can prevent gases, water vapor and other substances from entering the infrared camera housing. If your housing is not well sealed, then the gas may damage your infrared camera, and water vapor may corrode your infrared camera, so sealing is very necessary. Moreover, if your infrared camera housing is not well sealed, it may affect the performance of your infrared camera.